Car detailing polishing pad for moderate to fine defect removal

The most versatile foam pad in the RUPES BigFoot range, the DA FINE Foam Pad Yellow will deliver extremely effective rates of defect removal and at the same time provide a high-gloss finish on most paint systems. Suitable to be used with RUPES DA-FINE polishing compound for moderate to fine defect removal, paint refinement, or final finishing after heavy compounding steps.

The new pad provides the same high performing foam material as the current random orbital yellow foam pad, but now also works in tandem with gear-driven orbitals, the only difference is a more vibrant shade of yellow.

Sizes Available:

• ⌀ 40mm — 25mm/1" backing plates
• ⌀ 70mm — 50mm/2" backing plates
• ⌀ 100mm — 75mm/3" backing plates
• ⌀ 150mm — 125mm/5" backing plates
• ⌀ 180mm — 150mm/6" backing plates

Features & Benefits:

• Open cell structure.
• New curved edge for safer working.
• Suitable for use with Velcro backing systems.
• Suitable for small polishing requirements (size depending on).
• Suitable for all types of automotive paintwork & marine gel coats.
• Removes moderate to fine defects.
• Refines & also offers final finish following heavy compounding steps.
• Pack Size 1 Pad.
• New factory sealed bags to avoid contamination during transport on larger pads.

Technical

• Material — Open Cell Foam
• Backing — Hook & Loop (velcro)
• Abrasiveness — 5/10
• Malleable— 7/10
• Paint Types — Hard, Medium & Soft

Directions for use:

• Keep your pads clean during use, removing excess compound with a pad tool or compressed air.
• Do not over-saturate the pad with compound.
• Wash with a pad washer or by hand with cleaning detergent for prolonged life.
• Do not allow the pad to get too hot, this can cause delamination.
• Solvents or other strong cleaners can destroy the foam.